ς Extremely elegant, perfectly smooth, laser-welded structure. ς 2 to 6 column radiators, in heights from300 - 2,000mm ς2-stage painted, durable and non-corrosive finish. ς Wide range of colours available by special order. ς Supplied pre-welded and ready for installation. Delivered in sets ς of 2 to 30 sections, in length from 92 - 1380mm. Each ς section has a nominal width of 46mm. ς Special plugs have been designed and patented to blend with ς the smooth curves of Tubolaser. ς Supplied with 1" fittings. ς Maximum operating pressures are 12 bar for 2/3/4 column ς radiators, 8 bar for 5 columns and 6 bar for 6. ς All heat outputs shown derive from tests and approvals to ς EN442, based on an average water temperature of 80?C and ς a room temperature of 20?C. ς Fully guaranteed for 5 years from all defects caused by faulty ς materials or workmanship.

For the architect and the interior designer, the radiator has always been a problem. The productΖs inherent nature, its appearance, shape, size and colour limitations have, invariably, meant that creative compromise has been necessary.

Rarely could a room be designed in which aesthetics and heating requirements live together really perfectly. There was always a degree of sacrifice necessary on one side of the other.

With Tubular Steel Radiators, Biasi have created a radiator concept that delivers the best of all possible worlds.

Here is a radical range of radiators that not only sets new standards in manufacturing excellence and performance but also is capable of actually enhancing the design process by virtue of appearance and versatility - and that applies anywhere from homes to sports complexes, from public buildings to community centres.

Biasi Tubular Steel Radiators are little short of individual works of art. These are radiators so attractive that they can become, effectively, integral elements within the whole interior design process, even driving that creative process.

The beauty of these radiators comes from the fact that they are manufactured using laser welding, the only technology that guarantees maximum precision, absolute cleanliness and a perfectly smooth finish without a trace of a weld joint in the finished product.

All radiators are supplied with 1" left and right hand threaded tapings suitable for 1/2" B.S.P reducers (supplied). The radiator is manufactured with bottom, opposite end connections. Plug and vent supplied.

Maximum operating pressure is 12 bar for 2,3 & 4 column radiators.

Radiator sections are supplied assembled ready for installation. Each section has a nominal length of 46mm (+/- 2mm).

The heat output figures quoted have been derived from tests and approvals to EN442.

All radiators are finished in a superior white gloss RAL 9010 and individually packaged, being wrapped in heat shrink polythene film and double layered cardboard to prevent against damage and scratches in transit.

Each radiator is fully guarantees for 5 years from the date of installation for any defects arising due to faulty materials or manufacture.

ALL DIMENSIONS QUOTED ARE ? 2mm

Column B1 & C1 = radiator on mounting nearest to wall

Column B2 & C2 = radiator on mounting furthest from the wall.

 

Additional fixtures and fittings (not supplied) will be required to complete the installation of the wall brackets and floor mounts. The type of fixtures and fittings to be used will depend on the type of wall or floor construction.

---

Biasi Tubular Steel Radiator PDF